Home   ||   About Us   ||   Product   ||   Internet   ||   Honor   ||   Contact Us   ||  İ
Rotor Blade of wind ...
MW Blade Tip
Wind Turbine Nacelles
Carbon fibre product
Closed circuit cooling tower
Cooling Tower Fan
Ventilator
High pressure pipe
Deep hole process machine
Traffic protection barrier
Traffic noise barrier
Non-metal mold
PRECISE Electromechanical(Dezhou) Technology Co., Ltd.
Tel:0534- 2585148
Fax:0534-8709959
Email:sales@aerofrp.com

Product >> Carbon fibre product

Brief Introduction
 Diameter range: 38mm-200mm(1.5inch-8inch)
 Working pressure range: 3.5MPa-25MPa
The highest working temperature: 100℃
Products characteristic:
Good high-pressure resistance,good corrosion resistance,long service life.
Light weight,easy installation and transportation
Screw connection, good sealing.
Small friction coefficient,no dirt deposition inside pipe,excellent hydraulic characteristics.
Using field:
Bring or fresh water transferring pipe.
Sewage water disposal transferring pipe.
Fire fighting pipe.
Crude oil and natural gas carrying pipe.
Processing pipe of petroleum chemical.
Tank connection pipe for single well.
Oil collection pipe for single well.
Water injection pipe.
Seawater desalting equipment.
Connection Method & Standard
Match of the pipes and the accessory
The FRP high-pressure pipe and the accessory  all take the whorl as it's joining method.The specifications and pressure grade of the pipes and the accessory all match each other very well.What's more,pipes are produced by the special filament winding process adopted high strength fiberglass and epoxy resin.
Pipe joining method
API8 thread or 10 thread whorl joining,sealed by special sealer.
Manufacture and acceptance standard
API 15HR,API 15LR America oil Association standard
SY/T 6267-2006 China petrol and Natural Gas Profession standard.
Technical & Performance


 

Epoxy resin pipe system

Blue pipe

Red pipe

RTRP ( Reinforced the rmosetting resin pipe), classified according to ASTM2310    

RTRP-11AX

RTRP-11AF

Diameter range

38-200mm

38-200mm

Circulating pressure MPa

5.5-27.6

5.5-24.2

Resin system

epoxy

Fragance epoxy

The highes t working temperature ℃

80℃

100℃

Innerliner nominal thickness

No inner liner

No inner liner

Joint method

8 thread whorl

8 thread whorl

Using field

Crude oil and natural gas water injection transferring and oil gathering pipe;brine or fresh water;CO2

Crude oil and natural gas water injection transferring and oil gathering pipe;brine or fresh water;CO2

 

 
   
 
   
   
   

High Pressure fiberglass(FRP) pipe for oil drilling oil field pipe:
Material:Epoxy Resin,continous filament roving,flexible agent,curing agent.
Sizes: 1.5 to40 inches (DN40-DN1000)
Length: 10 m, 12 m;
pressure rating: Maximum 25.0MPa;
Working temperature: Maximum 120 ℃;
 Connection:Thread ,Adhesive Bonded Joint, Bell / Spigot Double O-RING Joint;
Application: ballast, bilge, fuel, cleaning, ventilation, cooling, fireproof and other pipeline systems;
High Pressure fiberglass(FRP) pipe for oil drilling oil field pipe Executive standards:
ASTM D2996 “Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications”
ASTM D2992 “Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass”(Glass-Fiber-Reinforced Thermosetting-Resin) pipe and fittings”
ASTM D1599  “Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe. Tubing and Fittings”
API 15HR -2001“Specification for High Pressure Fiberglass line Pipe”
High Pressure fiberglass(FRP) pipe for oil drilling oil field pipe character:
Durable and corrosion resistant , is 4-5 times of steel pipe.
Do not produce rust and alga-suitable for portable water
light weight, high strength, easy installation.(1/4 weight of steel)
Require no internal and external coating.
High flow efficient,allow downsize.
Have design life of 30-50 years
No maintaince cost.

low internal frication,low operation(pumping) cost.
Suitable for high pressure
Show contant hydraulic character over time
Freezing tolerance.It can be longly used in -40-100 °C.
Have easy and reliable jointing way
Are suitable for underground and aboveground application.
High Pressure fiberglass(FRP) pipe for oil drilling oil field pipe Application:
Desalination
water treadment
water distribution networks
chemical process plant and power plant
petrochemical, metallurgy and mining
firewater
hot and cold water
Drinking water
Wastewater/Sewage,Municipal water
Irrigation
Circulating water 
 ship and marine engineering 

Diameter & Pressure


Diameter

Pressure

1.5"(40mm)

3.5MPa/5.5MPa/7MPa/8.5MPa/10MPa/14MPa

2"(50mm)

2.5"(65mm)

3"(80mm)

4"(100mm)

6"(150mm)

8"(200mm)

1.5"(40mm)

17MPa

2"(50mm)

2.5"(65mm)

3"(80mm)

4"(100mm)

6"(150mm)

1.5"(40mm)

21MPa

2"(50mm)

2.5"(65mm)

3"(80mm)

4"(100mm)

1.5"(40mm)

25MPa

2"(50mm)

2.5"(65mm)

3"(80mm)

4"(100mm)

 

 

  
 Copyright© 2020 PRECISE Electromechanical(Dezhou) Technology Co., Ltd. All rights reserved  Tel00 86 534 2585148 Fax0534-8709959  E_mailsales@aerofrp.com